Regulator/Rectifier

Electrical: Regulator/Rectifier

Part Number: 7004-RR150

Price: £49.94 (Including VAT at 20%)

150 watt full wave regulator/rectifier for use with DC electrical systems.

Built in relay activates switched 12V DC output line only when engine is running, with adjustable shut-off delay.

Adjustable output voltage

For universal use with single phase systems with a floated earth.

Please note - this part will only work with systems with a floated earth (no earth connection in the stator's lighting wires). Instructions for how to float the eatrth on KTM stators are availble, please call for information.

Electrical: Honda 250X/450X Regulator/Rectifier

Part Number: 7004-0030

Price: £49.94 (Including VAT at 20%)

Replacment for Honda X for use with Trail Tech Stator Kit 8202/8251 only.

Electrical: Regulator Rectifier KTM

Part Number: 7004-0041

Price: £49.94 (Including VAT at 20%)

Replacment for KTM for use with Trail Tech Stator Kits 8310/8311/8312/8313 only.

Electrical: KTM 4stk / YFZ450 Regulator/Rectifier

Part Number: 7003-0020

Price: £49.94 (Including VAT at 20%)

Replacment for YFZ450 for use with Trail Tech Stator 8500 Kit only.

Electrical: Universal Voltage Regulator

Part Number: 7003-AC01

Price: £18.95 (Including VAT at 20%)

Trail Tech AC Voltage Regulator
- Improved AC Regulator with Adjustable Output.
- Universal voltage regulator limits voltage to 12.0-16.0 volts for AC systems (DC systems require a regulator/rectifier.)
- Conditions circuit to eliminate electrical spikes, protect from lamp blow-outs, and reduce flicker and dimming.
- Dial-a-Brightness for halogen and quartz lights:
- At 14+ VAC setting, the lamps will approach HID lumens (~70%) but lamp life is short (good for racing.) ~25 hour lamp life.
- At standard setting, about 13.8 VAC, the lamps should last about 500 hours.
- At minimum setting, the lamps are not as bright as HID (~30%), but last over 1,000 hours.
Included in Trail Tech plug-and-play high-output AC electrical systems with model-specific connectors; no cutting or splicing required.

Designed and manufactured by Trail Tech.